If you’re running a portable LoRa or Meshtastic node, your antenna choice matters more than most people realise. The UKSN Portable Antenna Upgrade Kit is designed to give you a simple, reliable boost in signal performance without adding bulk, complexity, or unnecessary extras. It’s the perfect upgrade for anyone running a mobile, field, or everyday carry node. 
 
What’s Included
Project LoRa 868MHz SMA Male 195mm Antenna
A longer, higher-performance antenna designed specifically for 868MHz LoRa use.
Tuned for the UK/EU 868MHz frequency band
Approx. 195mm length for improved range vs short stock antennas
Omni-directional design for consistent coverage in all directions
SMA Male connector for easy connection to most nodes

This antenna is a noticeable upgrade over the small “stubby” antennas often included with devices, giving you more reliable communication in both urban and rural environments.

SMA Female to IPEX 10cm Extension Cable
Included to make sure your setup actually works - even if your node uses an internal antenna connector.
Converts IPEX (U.FL) to standard SMA
Compatible with devices like Heltec V3, Heltec V4, and similar boards
10cm length keeps things tidy and portable

You may not need this cable depending on your device - but if you do, it saves you from delays, extra orders, and frustration.
 
Why Upgrade Your Portable Antenna?
Most stock antennas are built to be cheap and compact - not to perform. Upgrading to a properly tuned 868MHz antenna can:
Improve connection reliability between nodes
Increase usable range in real-world conditions
Reduce dropped or weak messages
Make your node more effective within the wider mesh network

Even small gains in antenna performance can make a big difference in how useful your node actually is.

Built for Portable Use
This kit is intentionally simple and lightweight, making it ideal for:
Pocket or EDC nodes
Field use and outdoor activities
Travel setups
Backup communication kits
Testing and experimenting with different node placements

No bulky mounts. No unnecessary cables. Just a clean, effective upgrade.

Compatibility
Designed to work with any 868MHz LoRa / Meshtastic node, including:
Heltec V3
Heltec V4
ESP32-based LoRa boards
Most SMA or IPEX-connected devices

If your node already has an SMA connector, you can plug the antenna straight in.
If it uses IPEX, the included cable has you covered.

Portable vs Loft Setup
This bundle is focused on mobility and simplicity. If you’re planning a fixed install (like a loft setup), you’ll get better results from a larger antenna such as our Project LoRa / Meshtastic 868MHz 3dBi Antenna Upgrade Kit, but for portable use, this strikes the ideal balance between size, durability, and performance.

UKSN Tip
For portable nodes, orientation matters.
Keep your antenna vertical where possible and avoid blocking it with your body or gear - even small adjustments can noticeably improve signal performance.